Home ›

Networks

Cisco 48-Port Gigabit Ethernet Switch

Requirements: 

 

AC input voltage/frequency:

  • 100 – 240 V (autoranging)
  • 1.3 – 0.8 A
  • 50 – 60 Hz

Environmental constraints:

  • Operating temperature: 32 – 113ºF (0 – 45ºC)
  • Storage temperature: -13 – 158ºF (-25 – 70ºC)
  • Operating relative humidity: 10 – 85 percent (noncondensing)
  • Operating altitude: Up to 10,000 feet (3000 meters)

Storage altitude: Up to 15,000 feet (4500 meters)

 

Features: 

 

  • Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), UplinkFast, and PortFast, help to maximise network uptime.
  • Multilayer QoS features help ensure that network traffic is classified and prioritised, and that congestion is avoided in the best possible manner.
  • Each dual-purpose uplink port allows connection either through copper Ethernet or fiber-optic cables (fiber-optic requires an SFP adapter).
  • Express Setup simplifies initial configuration of a switch through a Web browser.
  • ACLs can be used to restrict access to sensitive portions of the network by denying packets based on source and destination MAC addresses, IP addresses, or TCP/User Datagram Protocol (UDP) ports. ACL lookups are done in hardware, so forwarding performance is not compromised when implementing ACL-based security.

 

Description: 

The WS-C2960G-48TC-L is one of the Catalyst 2960 series fixed-configuration switches offering Gigabit Ethernet connectivity with enhanced local area network (LAN) services for midsize and branch office networks.

The G-48TC-L model provides:

  • Forty-four 10/100/1000Base-T ports for desktop connectivity
  • Four dual-purpose uplink ports, each having one 10/100/1000 Ethernet port and one small form-factor pluggable (SFP) Gigabit Ethernet port, with one active at a time (Note: SFP connectivity requires an adapter such as the GLC-FE-100FX or GLC-SX-MM transceiver.)

The LAN Base feature set includes a rich Layer 2+ suite of intelligent services, including advanced quality of service (QoS), granular rate limiting, access control lists (ACLs), and multicast services.

Security is delivered through a wide range of authentication methods, data encryption technologies, and network admission control (NAC) based on users, ports, and MAC addresses.

The Windows-based Cisco Network Assistant provides intuitive switch management and is available at no cost from the Cisco Web site.

Additional Services Available at Retail Rates: Additional management services are available with CiscoWorks SNMP network-management software, which provides end-to-end device, virtual local area network (VLAN), traffic, and policy management. The Web-based CiscoWorks Resource Manager Essentials enables automated inventory collection, software deployment, easy tracking of network changes, views into device availability, and quick isolation of error conditions.

More information about this product is available on the Cisco Web site.

cisco_48port_gigabit_eth_switch.gif
Price: R4,990.00

Cisco 24-Port Gigabit Ethernet Switch

Requirements: 
  • AC input voltage/frequency: 100-240VAC (autoranging), 1.3-0.8A, 50-60 Hz
  • Operating temperature: 32 to 113ºF (0 to 45ºC)
  • Storage temperature: -13 to 158ºF (-25 to 70ºC)
  • Operating relative humidity: 10 to 85 percent (noncondensing)
  • Operating altitude: Up to 10,000 feet (3000m)
  • Storage altitude: Up to 15,000 feet (4500m)
    • Features: 
  • Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), UplinkFast, and PortFast, help to maximize network uptime.
  • Multilayer QoS features help ensure that network traffic is classified and prioritized, and that congestion is avoided in the best possible manner.
  • Each dual-purpose uplink port allows connection either through copper Ethernet or fiber-optic cables (fiber-optic requires an SPF adapter). manner.
  • Express Setup simplifies initial configuration of a switch through a Web browser.
  • ACLs can be used to restrict access to sensitive portions of the network by denying packets based on source and destination MAC addresses, IP addresses, or TCP/User Datagram Protocol (UDP) ports. ACL lookups are done in hardware, so forwarding performance is not compromised when implementing ACL-based security.
    • The C2960G-24TC-L is one of the Catalyst 2960 series fixed-configuration switches offering Fast Ethernet and Gigabit Ethernet connectivity with enhanced LAN services for midsize and branch office networks.

    The G-24LC model provides:

    • Twenty-10/100/1000Base-T ports for desktop connectivity
    • Four dual-purpose uplink ports, each having one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP) Gigabit Ethernet port, with one active at a time.

    Please note:  SFP connectivity requires an adapter such as the GLC-FE-100FX transceiver.
    The LAN Base feature set includes a rich Layer 2+ suite of intelligent services, including advanced quality of service (QoS), granular rate limiting, and access control lists (ACLs), and multicast services.

    Security is delivered through a wide range of authentication methods, data encryption technologies, and Network Admission Control (NAC) based on users, ports, and MAC addresses.

    There are two options for switch management: an embedded GUI device manager for all operating systems and the Windows-based Cisco Network Assistant available at no cost from the Cisco Web site http://www.cisco.com/go/cna.

    Addition management is available through Cisco Works SNMP network-management software. CiscoWorks for Switched Internetworks provides end-to-end device, VLAN, traffic, and policy management. The Web-based CiscoWorks Resource Manager Essentials enables automated inventory collection, software deployment, easy tracking of network changes, views into device availability, and quick isolation of error conditions.

    Price: R2,748.00

    Cisco 880 Series Ethernet Security Router

    Requirements: 
    • AC input voltage: 100 to 240 VAC
    • Nonoperating temperature: -4 to 149°F (-20 to 65°C)
    • Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing)
    • Nonoperating altitude: 0 to 15,000 feet (0 to 4,570 m)
    • Operating temperature: 32 to 104°F (0 to 40°C)
    • Operating humidity: 10 to 85 percent relative humidity (noncondensing)
    • Operating altitude: 0 to 10,000 feet (0 to 3,000 m)
    Description: 
    The CISCO881-SEC-K9 is one of the 880 Series of integrated services routers, combining Internet access, security, voice, and advanced IP services into a single device. These fixed-configuration routers can provide services for up to 20 users. They can be used by small organizations or by organizations with remote offices and teleworkers that need to establish secure virtual private network (VPN) connections to the organization's network.

    The 881-SEC-K9 model's WAN interface accepts 10/100-Mbps Fast Ethernet connections. The router includes the following functionality:

    • Configuration tools: The web-based Cisco Configuration Professional configuration tool simplifies deployment, management, and troubleshooting through smart wizards and task-based tutorials, without requiring knowledge of the included Cisco IOS Software's command-line interface.

    • Wired LAN connectivity: The four-port 10/100-Mbps Fast Ethernet managed switch provides connections for multiple devices and has the ability to designate a port as the network demilitarized zone (DMZ). Two ports support Power over Ethernet (PoE) for powering IP phones or external access points. Virtual LAN (VLAN) support allows computers to be moved to another location without reconfiguration.

    • Security features: The router provides comprehensive security through an intrusion prevention system (IPS) firewall and a stateful packet inspection (SPI) firewall. It also provides dynamic routing and advanced quality of service (QoS) features. The optional Cisco IOS Content Filtering subscription (must be obtained directly through Cisco) adds another layer of defense against malware and phishing attacks.

    • Remote access: The router provides 20 IPsec VPN tunnels. There is no hardware support for SSL VPN connections, though organizations can request software-based SSL VPN licenses through TechSoup Canada.

    • Advanced IP services: Advanced IP services include support for Internet Protocol version 6 (IPv6), allowing for IPv6 multicast, addressing architecture, name resolution, statistics, translation, DHCP, and IPsec over IPv6 connections.

    Product service and support: Cisco will provide five years of hardware and software service and support ("SMARTnet") for any product or product bundle obtained through this donation program.

    More information about this product is available on the Cisco website.
    cisco_880_eth_security_router.gif
    Price: R579.00

    Cisco 520 Series IOS Content Filtering: 1-Year Subscription

    Description: 

    This subscription to the Cisco IOS Content Filtering service (part number SL-CNFIL-87x-1Y) can be used with Cisco 520 series routers to protect an organization from malware, adware, spyware, and phishing. It allows network administrators to create router policies that limit Internet access based on website categories or security ratings for sites that are known to host malicious content.

    This donation provides a one-year subscription to Cisco IOS Content Filtering. Organizations can renew the subscription when it expires by requesting this product again through CTX programme.

    More information about this product is available on the Cisco website.

    products_donated_by_cisco_logo.gif
    Price: R145.00

    Cisco 520 Series Wireless Fast Ethernet Router

    Requirements: 
    • AC input voltage: 100 to 240 VAC
    • Nonoperating temperature: -4 to 149°F (-20 to 65°C) 
    • Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing) 
    • Nonoperating altitude: 0 to 15,000 feet (0 to 4,570 m) 
    • Operating temperature: 32 to 104°F (0 to 40°C) 
    • Operating humidity: 10 to 85 percent relative humidity (noncondensing) 
    • Operating altitude: 0 to 10,000 feet (0 to 3,000 m)
    Features: 
    • Advanced security features include: 
      • A firewall that inspects traffic at the application layer to help protect the network from unauthorized users 
      • An inline intrusion prevention system that provides deep-packet inspection to effectively prevent a wide range of network attacks 
      • Built-in encryption using Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) that lets remote employees connect to the network securely using IPsec VPN, DMVPN, or optional SSL VPN (SSL VPN licenses must be obtained separately)
      • The optional Cisco IOS Content Filtering subscription (must be obtained separately) that adds another layer of defense against malware and phishing attacks
    • The router provides 20 IPsec VPN tunnels and up to 10 SSL VPN tunnels (SSL VPN licenses must be obtained separately).
    • Advanced QoS features allow for prioritizing of networking traffic for optimal delivery of rich voice and video applications. 
    • The wireless signal has an indoor range of 320 feet at 1 Mbps. Other wireless features include automatic rate selection for 802.11b/g,Wireless

    Ethernet Compatibility Alliance (WECA) interoperability, WiFi Multimedia (WMM) certification, and service set identification (SSID) globalization.

    Description:

    The SR520W-FE-K9 is one of the 520 Series of simplified, secure routers capable of supporting up to 50 users, making it ideal for small organizations. It provides secure access to the Internet and the organization's network through four 10/100 Mbps Fast Ethernet WAN ports as well as secure 802.11b/g wireless networking for up to 20 users and remote access via virtual private network (VPN) connections.

    The router provides comprehensive security through an intrusion prevention system (IPS) firewall and a stateful packet inspection (SPI) firewall. It also provides dynamic routing and advanced quality of service (QoS) features.

    The Cisco Configuration Assistant simplifies deployment, management, and troubleshooting.

    The four-port 10/100 Mbps managed switch provides connections for multiple devices and has the ability to designate a port as the network Demilitarized Zone (DMZ). Virtual LAN (VLAN) support allows computers to be moved to another location without reconfiguration.

    For SSL VPN functionality, organizations should request a 10-user SSL VPN license pack along with this product. Organizations might also want to request a 1-year subscription to Cisco IOS Content Filtering for enhanced defense against malware and phishing attacks.

    Product Service and Support: Cisco will provide five years of hardware and software service and support ("SMARTnet") for any product obtained through this donation program.

    More information about this product is available on the Cisco website.

    cisco_520_fast_ethernet_wireless_router.gif
    Price: R543.00

    Cisco 2960 Series 24-Port Power over Ethernet Switch

    Requirements: 
    AC input voltage/frequency:
    •    100 to 240 V
    •    8.0 to 4.0 A
    •    50 to 60 Hz

    Environmental constraints:
    •    Operating temperature: 23 to 104°F (-5 to 40°C)
    •    Storage temperature: -13 to 158°F (-25 to 70°C)
    •    Operating/storage relative humidity: 10 to 95 percent (noncondensing)
    •    Operating altitude: Up to 10,000 feet (3,000 m)

    Description:

    The WS-C2960-24PC-L is one of the Catalyst 2960 Series fixed-configuration switches offering Power over Ethernet (PoE), 10/100-Mbps Fast Ethernet, and 10/100/1000-Mbps Gigabit Ethernet connectivity with enhanced LAN services for midsize and branch office networks.

    The 24PC-L model provides:
    •    Twenty-four 10/100-Mbps PoE ports providing up to 15.4 W per port (370 W total) for desktop, wireless access point, IP telephony, or closed-circuit TV camera connectivity
    •    Two dual-purpose uplink ports, each having one 10/100/1000 Ethernet port and one small form-factor pluggable (SFP) Gigabit Ethernet port, with one active at a time

    The switch's LAN Base IOS software includes a rich Layer 2+ suite of intelligent services, including advanced quality of service (QoS), granular rate limiting, access control lists (ACLs), and multicast services.

    There are two options for switch management: an embedded GUI device manager for all operating systems or the Windows-based Cisco Network Assistant available at no cost from the Cisco website.

    Usability is enhanced by Cisco Catalyst Smart Operations, a feature set that simplifies LAN deployment, configuration, and troubleshooting. These features enable automated installation and replacement of switches, faster upgrades, and easier troubleshooting with reduced operational cost.

    Security is delivered through a wide range of authentication methods, data encryption technologies, and Network Admission Control (NAC) based on users, ports, and MAC addresses. Cisco TrustSec prevents unauthorized access and helps ensure that users get only their designated privileges.

    Product service and support: Cisco will provide five years of hardware and software service and support ("SMARTnet") for any product or product bundle obtained through this donation program.

    More information about this product is available on the Cisco website.

    Cisco_2960.gif
    Price: R1,808.00

    Cisco 802.11a/b/g Lightweight Access Point

    Requirements: 
    Input Power:

    • 100 to 240 VAC; 50 to 60 Hz (power supply)
    • 36 to 57 VDC (device)
    • For Power over Ethernet — power sourcing equipment (PSE) compliant with Cisco Inline Power or IEEE 802.3af and providing at least 12.2 W at 48 VDC

    Environmental constraints:

    • Operating temperature: 32 to 104°F (0 to 40°C)
    • Operating relative humidity: 10 to 90 percent (noncondensing)
    Features: 
    • Dual 802.11a and 802.11g radios with integrated antennas (2.4 GHz)
    • Frequency range: 802.11b/g: 2412 – 2462 MHz (11 channels); 802.11a: 5150 – 5350, 5725 – 5825 MHz (12 channels)
    • Supports 15 nonoverlapping channels
    • IEEE 802.11i-compliant; WPA2-certified and WPA-certified
    • Security management through the Cisco Wireless Security Suite, which provides reliable, scalable, centralized security management
    • Data rates of 54 Mbps to 1 Mbps
    • Can be wall or ceiling mounted
    • Modulation: 802.11a: OFDM; 802.11b/g: direct sequence spread spectrum (DSSS), OFDM
    • Maximum radio power: 802.11b/g radio: 100 mW; 802.11a radio: 50 mW
    Description: 

    The AIR-LAP1131AG-A-K9 is a lightweight version of the 802.11a/b/g Access Point wireless access points. It provides high-capacity, high-security, and enterprise-class features in an unobtrusive, office-class design. A wireless LAN controller is required to operate this access point.

    Two radios with built-in omnidirectional antennas provide simultaneous support for 802.11a and 802.11g standards with backwards compatibility for legacy 802.11b clients. This wireless access point runs Lightweight Access Point Protocol (LWAPP) to ease configuration and installation of a wireless network. Multiple nonoverlapping channels minimize interference in congested airspace, simplifying the deployment of high-capacity networks.

    The 1130AG Series meets the international Common Criteria (ISO 15408) standard for computer security. This product provides setup, deployment, and remote management capabilities through Web-based tools and the Cisco IOS command-line interface.

    The product is shipped with a universal power supply for connection to local power. Line power over Ethernet support requires the AIR-PWRINJ3 power injector or another inline power source.

    The Cisco Aironet 1130AG Series can be configured using the console port when there is no Dynamic Host Configuration Protocol (DHCP) server in the network or when there is no wired connection between the access point and the LAN. The AIR-CONCAB1200 console cable is required for connection to the console port.

    Product Service and Support: Cisco will provide five years of hardware and software service and support ("SMARTnet") for any product obtained through this donation program (Linksys products not included).

    More information about this product is available on the Cisco Web site.

    cisco_lightweight_access_point.gif
    Price: R507.00

    Cisco 48-Port Ethernet Switch

    Requirements: 

     

    AC input voltage/frequency:

    • 100 to 240 V
    • 1.3 to 0.8 A
    • 50 to 60 Hz:

    Environmental constraints:

    • Operating temperature: 32 to 104ºF (0 to 40ºC)
    • Storage temperature: -13 to 158ºF (-25 to 70ºC)
    • Operating relative humidity: 10 to 85 percent (noncondensing)
    • Operating altitude: Up to 1000 feet (3049 meters)
    • Storage altitude: Up to 15,000 feet (4573 meters)

     

    Features: 

     

    • Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), UplinkFast, and PortFast, help to maximize network uptime.
    • Multilayer QoS features help ensure that network traffic is classified and prioritized, and that congestion is avoided in the best possible manner.
    • Express Setup simplifies initial configuration of a switch through a Web browser.
    • ACLs can be used to restrict access to sensitive portions of the network by denying packets based on source and destination MAC addresses, IP addresses, or TCP/User Datagram Protocol (UDP) ports. ACL lookups are done in hardware, so forwarding performance is not compromised when implementing ACL-based security.

     

    Description: 

    The C2960-48TT-L is one of the Catalyst 2960 series fixed-configuration switches offering 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity with enhanced LAN services for midsize and branch office networks. The 48TT-L model provides:

    • Forty-Eight Ethernet 10/100 Base-T ports for desktop connectivity
    • Two 10/100/1000 Ethernet uplink ports

    The LAN Base feature set includes a rich Layer 2+ suite of intelligent services, including advanced quality of service (QoS), granular rate limiting, and access control lists (ACLs), and multicast services.

    Security is delivered through a wide range of authentication methods, data encryption technologies, and Network Admission Control (NAC) based on users, ports, and MAC addresses.

    There are two options for switch management: an embedded GUI device manager for all operating systems and the Windows-based Cisco Network Assistant available at no cost from the Cisco website.

    Product service and support: Cisco will provide five years of hardware and software service and support (SMARTnet) for any product obtained through this donation program (Linksys products not included).

    cisco_48port_eth_switch.jpg
    Price: R1,808.00

    Cisco 880 Series 10-User SSL VPN License Pack

    Description: 

     

    The Cisco FL-SSLVPN10-K9= license upgrade pack allows the Cisco 880 Series routers to support up to 10 concurrent secure sockets layer virtual private network (SSL VPN) sessions.

    SSL VPN sessions offer a flexible and secure way to extend network resources to virtually any remote user with access to the Internet and a web browser. Administrators can customize access and extend the reach of their organizations' networks to individuals according to their roles, such as teleworkers, contractors, and partners.

    These SSL VPN licenses are not stackable, meaning only one SSL VPN license upgrade pack can be applied to any one security appliance. Multiple license packs cannot be used with a single appliance. An organization that requires a greater number of user licenses than is available through SANGOTeCH should contact Cisco directly to request licenses at regular retail prices.

    More information about this product is available on the Cisco website.

    Obtaining Your Licenses: Cisco donation processing takes 6 to 8 weeks upon approval. After your request is processed, you will receive a product authorization key (PAK) through standard mail. You will be directed to enter this key and your router serial number on the Cisco website, which will provide you with an activation key. Entering this key through your router's command-line interface will activate your licenses.

    Choose Carefully: The administrative fee for this product is not refundable, and the product cannot be exchanged.
    products_donated_by_cisco_logo.gif
    Price: R217.00

    Cisco 520 Series Fast Ethernet Router

    Requirements: 
    • AC input voltage: 100 to 240 VAC
    • Nonoperating temperature: -4 to 149°F (-20 to 65°C)
    • Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing)
    • Nonoperating altitude: 0 to 15,000 feet (0 to 4,570 m)
    • Operating temperature: 32 to 104°F (0 to 40°C)
    • Operating humidity: 10 to 85 percent relative humidity (noncondensing)
    • Operating altitude: 0 to 10,000 feet (0 to 3,000 m
    Features: 
    • Advanced security features include: 
    - A firewall that inspects traffic at the application layer to help protect the network from unauthorized users
    -An inline intrusion prevention system that provides deep-packet inspection to effectively prevent a wide range of network attacks 
    - Built-in encryption using Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) that lets remote employees connect to the network securely using IPsec VPN, DMVPN, or optional SSL VPN (SSL VPN licenses must be obtained separately)
    -The optional Cisco IOS Content Filtering subscription (must be obtained separately) that adds another layer of defense against malware and phishing attacks
    • The router provides 20 IPsec VPN tunnels and up to 10 SSL VPN tunnels (SSL VPN licenses must be obtained separately).
    • Advanced QoS features allow for prioritizing of networking traffic for optimal delivery of rich voice and video applications.
    Description: 

    The SR520-FE-K9 is one of the 520 Series of simplified, secure routers capable of supporting up to 50 users, making it ideal for small organizations. It provides secure access to the Internet and the organization's network through four 10/100 Mbps Fast Ethernet WAN ports and remote access via virtual private network (VPN) connections.

    The router provides comprehensive security through an intrusion prevention system (IPS) firewall and a stateful packet inspection (SPI) firewall. It also provides dynamic routing and advanced quality of service (QoS) features.

    The Cisco Configuration Assistant simplifies deployment, management, and troubleshooting.

    The four-port 10/100 Mbps managed switch provides connections for multiple devices and has the ability to designate a port as the network demilitarized zone (DMZ). Virtual LAN (VLAN) support allows computers to be moved to another location without reconfiguration.

    For SSL VPN functionality, organizations should request a 10-user SSL VPN license pack along with this product. Organizations might also want to request a 1-year subscription to Cisco IOS Content Filtering for enhanced defense against malware and phishing attacks.

    Product Service and Support: Cisco will provide five years of hardware and software service and support ("SMARTnet") for any product obtained through this donation program.

    More information about this product is available on the Cisco website.

    cisco_520_fast_ethernet_router.gif
    Price: R434.00
    12next ›last »
    Syndicate content